Standard Retrofit / Overfloor Underfloor Heating System

High quality XPS, rapid action retrofit underfloor heating system.

Our Standard Retrofit/Overfloor underfloor heating solution is a low profile 25mm 350kPa high quality grooved XPS (Extruded polystyrene) which makes it a great choice for heating on existing floors and a cost effective and efficient way to install underfloor heating in your home.

The system uses 16mm pipe at 150mm spacing and produces approximately (80-100W/m²) output. Not to be confused with any EPS system. Overfloor board dimensions are 1200mm x 600mm x 20mm (0.72m2)

Reasons to choose XPS Floor Heating System:

• The boards are insulation, therefore will insulate pipe from the floor below.
• A panel thickness of just 25mm made from high density, strong XPS (compressive strength of 350KPa), far superior in performance to EPS.
• Energy-saving low temperature system.
• Low weight - Ideal for renovation of old buildings and installing on existing flooring.
• Unique 25mm system that uses 16mm pipe at 150mm spacing.
• Rapid response time – comparable to radiator heat up times.
• Can be used over any floor construction.
• Can be used with any floor covering (tiles require ply or dry screed board on the XPS).
• Suitable for boilers, heat pumps etc.