Details
Underfloor heating1 control valve provides temperature control of underfloor heating circuits and comes ready assembled with thermostatic blending valve and pre-wired circulating pump to allow the speedy and simple installation of underfloor heating in an extension or conservatory. The unit has fitted 1/4 turn valves for simple connection to the existing heating system flow and return pipework. To provide room temperature control a thermostat or programmable room thermostat can be wired back to the unit's fitted Grundfos pump. The heated floor area should not be greater than 20m2.
Set includes:
- 22mm blending valve
- 2 x 16mm x 1.8mm manifold pipe connectors
- 15-60 circulating pump
- Fitted 1/4 turn isolating valves
- 12m of edge insulation
- 2 metres of pipe conduit
- 200 staples (to fix pipe to floor insulation)
- 100m x 16mm PE-RT barrier pipe ~ enough for 20m2 @ 200mm pipe centres
- 15m2 @ 150mm pipe centres or
- 10m2 @ 100mm pipe centres
- Instructions
Questions on PE-RT Pumped Single Room Kit
Sort by
- From jamie at 20/08/2011 16:37
- Hi, I recently purchaced a pumped single room system from you, ive just fitted the valve /pump to the wall and conected the barrier pipe that has been fixed to the insulation. i have pressure tested the system by conecting the valve up to the cold water supply. my question is is this an ok way to test the pressure and if so is it safe to screed the floor as there doesn't seem to be any leeks anywhere. im thinking of mixing the sreed and laying by hand as apose to pumping a wet mix in to keep costs down is this advisable and what mix do you recommend and how wet.
- Once you have got all of the air out I usually turn off the return and
let the flow keep coming in, this will build up to 3-4 bar from the tap
pressure. - Do you find this question helpful? Yes No