The underfloor heating1 PPSU manifold is assembled from single port PSU plastic sections.

Each section includes 1" male spigot, fitted with two o- rings and a female 1" socket.  The sections are assembled by simply screwing them together by hand.  

This feature creates more flexibilty and allows the installer to put together manifolds of the required size on site.  Alternatively underfloor heating1 can supply ready assembled manifolds.  If required these can be lengthed or shortened without any tools.  This unique feature can significantly reduce installer/supplier stock levels.

The sections are manufactured using PSU plastic. Polysulfone is a high cost, rigid, material characterised by high strength, very high surface-temperature limits, low creep, self-extinguishing ability, and resistance to greases, solvents, and chemicals.

The underfloor heating1 PPSU manifold system offers a flexible alternative to expensive brass and chrome manifolds.

The underfloor heating1 chrome manifold includes the following:

• Fully adjustable flowmeters
• 2 ball valves
• Connection to the ball valve with gasket with plane seat and o-ring
• 2 brackets with supports
• 2 built-in manual air vents with o-ring
• 2 ¹/₂" drain cocks 
• M24 x 1,6mm pipe connectors