Retrofit Underfloor Heating

Home /

Our super slim retrofit underfloor heating systems allow you to have underfloor heating on all types of subfloors.

Installing wet underfloor heating systems where there is existing flooring can become costly and time consuming due to the massive upheaval needed.

We can provide two types of retrofit systems, 'standard' and 'premium'. Both systems are sufficient for complete space heating and are great for any project.

Standard

Standard Retrofit Underfloor Heating System

20mm 350kPa high quality XPS (Expanded polystyrene) with 300 micron foil covering. Uses 16mm pipe at 150mm spacing.

Produces approximately (80-100W/m²) output. Not to be confused with any EPS and/or non-foiled XPS system.

The only 20mm retrofit system with 16mm pipe available in the UK!


Starting from £20 per m2
(Inc. manifolds, controls, pump pack etc.)
Learn more

Premium

Premium Retrofit Underfloor Heating System

18mm Fermacell Gypsum Fibre boards supplied with calcium sulphate filling compound for the ultimate retrofit system. The boards/compound warm up creating thermal mass.

System uses 11.6mm pipe at 100mm spacing. Produces approximately (130-155W/m²)output. Not to be confused with any EPS and/or non-foiled XPS system.

The highest output retrofit system available in the UK!

Starting from £40 per m2
(Inc. manifolds, controls, pump pack etc.)
Learn more
Heatmiser Honeywell Devi Emmeti Danfoss Grundfos Strasshofer Reliance Water Control