Details
Underfloor heating1 3 port kit provides temperature control of underfloor heating circuit using thermostatic blending valve with circulating pump. The heated floor area should not be greater than 60m2.
Set includes:
- 3 Port Chrome Manifold
- 22mm Blending valve
- 15-50 Circulating pump
- Flow and return temperature sensor and gauge
- 2 x air vents, 2 filling and drain points
- 2 x 1" 1/4 turn manifold isolating valves
- 50m of edge insulation
- 3m of pipe conduit
- 600 staples (to fix pipe to floor insulation)
- 300m x 16mm PE-RT barrier pipe ~enough for 60m2 @ 200mm pipe centres or
- 45m2 @ 150mm pipe centres or
- 30m2 @ 100mm pipe centres
- Brass pump and compression 22mm pipe unions
- Instructions
Please note for clarity not all the parts supplied with this kit are shown in photo.
Questions on PE-RT Underfloor Heating Kit 3 Port x 300m
Sort by
- From John Mchugo at 12/06/2011 06:53
- I want to heat a bathroom (3.8m) hallway (4m) and kitchen (20m) with the remaining two rooms (10.5m and 14.7m) heated by radiators. Each room should have its own temp. control. Can I use this kit?
- You can use this kit for the UFH side of things and you could have individual room controls.
- Do you find this question helpful? Yes No